Datei:Watch jewel bearing and capstone.svg

Aus testwiki
Zur Navigation springen Zur Suche springen
Originaldatei (SVG-Datei, Basisgröße: 640 × 420 Pixel, Dateigröße: 24 KB)

Diese Datei stammt aus Wikimedia Commons und kann von anderen Projekten verwendet werden. Die Beschreibung von deren Dateibeschreibungsseite wird unten angezeigt.

Beschreibung

Beschreibung
English: Drawing of a jewel bearing and capstone in a mechanical watch. The bearing is sectioned through the axis. The jewels (red) are made of synthetic ruby. The lower jewel is called the 'hole jewel', the upper one is the 'capstone' or 'end jewel'. This type of bearing is used in watches where friction is critical, such as in the balance wheel pivots. With ordinary bearings (shown in Watch jewel bearing.svg), when the watch is vertical the shoulder of the shaft bears against the face of the hole jewel, increasing friction. This causes the watch's rate to vary with its position. In contrast, in this type, the capstone provides a low friction surface for the rounded end of the pivot to press against instead, reducing friction. The hole for the pivot is slightly convex (hourglass shaped) so that if the pivot is not exactly vertical it won't jam in the hole. The surface of the lower jewel ('bombé') is also slightly convex, holding a drop of oil (yellow) between the jewels, in contact with the pivot, by capillary attraction. The jewels are press-fitted into holes in the movement's supporting plates (grey). Information for this drawing came from Henry B. Fried (1954) Bench Practices for Watch and Clockmaker, Arlington Book Co., Virginia, USA, Book 3, Ch. 1, p.140-188
Datum
Quelle Eigenes Werk
Urheber Chetvorno
Genehmigung
(Weiternutzung dieser Datei)
I the author release this drawing into the public domain for any use whatever.
SVG‑Erstellung
InfoField
 Der SVG-Code ist valide.
 Dieses Diagramm wurde mit Inkscape erstellt.

Lizenz

Public domain Ich, der Urheberrechtsinhaber dieses Werkes, veröffentliche es als gemeinfrei. Dies gilt weltweit.
In manchen Staaten könnte dies rechtlich nicht möglich sein. Sofern dies der Fall ist:
Ich gewähre jedem das bedingungslose Recht, dieses Werk für jedweden Zweck zu nutzen, es sei denn, Bedingungen sind gesetzlich erforderlich.

Kurzbeschreibungen

Ergänze eine einzeilige Erklärung, was diese Datei darstellt.
Jewel balance wheel bearing and capstone

In dieser Datei abgebildete Objekte

Motiv

Dateiversionen

Klicke auf einen Zeitpunkt, um diese Version zu laden.

Version vomVorschaubildMaßeBenutzerKommentar
aktuell00:26, 16. Mai 2025Vorschaubild der Version vom 00:26, 16. Mai 2025640 × 420 (24 KB)wikimediacommons>ChetvornoChanged from Inkscape SVG to plain SVG to pass validator

Die folgende Seite verwendet diese Datei: